China Factory Suppliers Low Noise Cross Flow Blower - Fireplace Fan for Heat Surge Electric Fireplaces and Heating Solutions
| Model | Volt (VAC) | Fre (HZ) | Roller Size ¢D×L mm | Input Power (W) | Speed (RPM) ±10% | Air Speed (M/s) | Insulation Grade |
|---|---|---|---|---|---|---|---|
| ZTR43260/4815 | 110–240 | 50/60 | ¢43×160 | 8–16 | 1200–2500 | 2.5–6 | E, B, F, H |
| ZTL43190/4815 | 110–240 | 50/60 | ¢43×190 | 8–16 | 1200–2500 | 2.5–6 | E, B, F, H |
| ZTR43260-4815 | 110–240 | 50/60 | ¢43×260 | 10–14 | 1100–1700 | 3–6 | E, B, F, H |
| ZTL43260-4820 | 110–240 | 50/60 | ¢43×260 | 12–18 | 1000–2200 | 3–8 | E, B, F, H |
| ZTR43306 | 110–240 | 50/60 | ¢43×306 | 10–18 | 1000–2500 | 3–6 | E, B, F, H |
| Application |
Electric fireplace, electric heater, dehumidifier, air heater, disinfection cabinet, etc. Note: Our factory has an engineering design department, mould department, and rapid automatic press. You can provide your inquiry size and parameters and we will complete it for you. This table data is only reference parameters — please contact us and we will send you detailed drawings with full parameters in 2D or 3D. |
||||||
We provide this type of cross flow fan that uses a 43 mm diameter impeller (not 40 mm), so the airflow is bigger but the noise is lower. This type of blower has a length of 260 mm with 4 stable vortices, and uses a high-end AC motor which has high strength and is not easy to deform or loosen.
The 43260 fan blower is mostly applied in electrical fireplaces and heaters. Wind speed is 1,200–1,500 RPM; when loaded with a heater, the wind speed is 1,450–1,700 RPM. The biggest feature of this blower is low noise and equal velocity. The length can be chosen per your inquiry — for example, 160 mm, 200 mm, etc.
We can produce Class B, F, or H motors, and these motors have CE, UL, or cUL certification. The centrifugal blower shell material is galvanized sheet; the impeller material is aluminum alloy. The shell is stamped and formed by precision molds, and the structure is stable. The motor bearing can be a ball bearing or oil bearing. The wind shell uses anti-fatigue and high-temperature silicone rubber parts. Motor parameters and dimensions can be customized.
- ✅ 43 mm Diameter Impeller
- ✅ Low Noise & Equal Velocity
- ✅ CE / UL / cUL Certified
- ✅ Class B / F / H Insulation
- ✅ Aluminum Alloy Impeller
- ✅ Customizable Parameters
